Not all aluminum EMT & conduit suppliers in Palm Bay, FL will take the time to make sure you know how to perform a conduit installation. But if you haven’t done one before, how can you know you’re doing it correctly? At American Conduit, we have a team of professionals who will be more than happy to answer any questions you may have. Not only will we tell you what type of aluminum conduit is best for your application, we’ll also tell you what size. In fact, we’ll be ready to tell you anything you want to know about the products we sell.
How to Properly Install Aluminum Conduit
Proper installation techniques for aluminum conduit are crucial in ensuring safety and durability. They ensure that the conduit is installed correctly, without damage to the cable, and that it can withstand environmental conditions and physical stress. Here’s how to make sure your installation goes as efficiently as possible.
Plan your installation: Before beginning your installation, it’s important to plan and measure the location where the conduit will be installed. This will help you determine the length of conduit you need, the fittings and accessories you need, and the tools and materials required. Also, consider the type of conduit you will be using (rigid or flexible) and the location where it will be installed (indoors or outdoors). This information will help you make informed decisions about the conduit and its components, ensuring a safe and efficient installation.
Use the correct tools: The right tools are essential. You’ll need a hacksaw, conduit cutter, conduit bender, and an adjustable wrench. For cutting and bending rigid aluminum conduit, a power saw and conduit bender may be necessary. When working with flexible aluminum conduit, you may need pliers and a cable stripper to make connections and splice cables.
Measure and cut conduit: When cutting aluminum conduit, measure it accurately to ensure a proper fit. For rigid aluminum conduit, use a hacksaw or power saw to make straight cuts. For flexible aluminum conduit, use a conduit cutter or pliers to make clean cuts. Cut the conduit to the correct length, and if necessary, bend it to fit into tight spaces or around corners.
Install conduit fittings: Conduit fittings are used to connect pieces of conduit and secure it to the wall, ceiling, or floor. When installing fittings, make sure they’re tight and secure to prevent movement and damage to the cable.
Secure conduit to the wall: To secure conduit to the wall, ceiling, or floor, use conduit clamps, conduit straps, or conduit hangers. Make sure the conduit is spaced correctly and that it’s not touching any other objects, including electrical boxes. This will help prevent damage to the cable and ensure the conduit stays in place.
Run the cable: When running cable through the conduit, make sure that there’s enough slack to allow for movement and to make connections. Ensure that the cable is not kinked or pinched, as this can damage the cable and compromise its performance. If necessary, use cable ties to secure the cable in place.
Test the installation: After the conduit and cable are installed, test the installation to ensure it is functioning properly. This may involve turning on electrical equipment to ensure that it is working and that there are no electrical issues. Additionally, inspect the installation for signs of damage, such as kinks in the conduit or broken fittings.
Our experts are what sets American Conduit apart from other aluminum EMT & conduit suppliers in Palm Bay, FL. See for yourself by contacting us online or calling 800-334-6825.